GPON OLT

OL3001 1-Port Mini GPON OLT

A compact 1U GPON OLT with one PON port and a 10GE uplink, built for small businesses, shops and rental properties adding fiber access.

PON Interface
1 × GPON, SFP+ slot, SC/APC
PON Standard
ITU-T G.984
Line Rate
2.488 Gbps downstream / 1.244 Gbps upstream
PON Wavelength
Tx 1490 nm / Rx 1310 nm
Overview

1-Port Mini GPON OLT

OL3001 is a 1U box GPON OLT with one GPON port, two Gigabit RJ45 uplinks and one SFP/SFP+ uplink for up to 10GE. It supports split ratios up to 1:128 over 20 km and is designed for small businesses, stores and property leasing. It works with existing GPON ODN networks and is managed via CLI, Telnet or web.

ORFA OL3001 1-Port Mini GPON OLT – Rear angle
Key Features

What the OL3001 brings to your network

01

10GE uplink

One SFP/SFP+ uplink port accepts GE or 10GE modules, alongside two Gigabit RJ45 uplinks.

02

1:128 split, 20 km reach

The GPON port supports an optical split ratio of up to 1:128 and a 20 km transmission distance.

03

ONT auto-discovery and remote upgrade

Online ONT configuration, auto-discovery, link detection and remote software upgrade simplify rollout.

04

Full Layer 2 switching

16K MAC addresses, 4096 VLANs, QinQ, VLAN translation, static and dynamic LACP, and 802.1D/802.1W.

05

Multicast and IPv6 ready

IGMP snooping and MLD v1/v2 snooping with up to 1K L2 and 1K L3 multicast groups, plus IPv6 routing.

Technical Data

Technical Specifications

ModelOL3001
PON
PON Interface1 × GPON, SFP+ slot, SC/APC
PON StandardITU-T G.984
Line Rate2.488 Gbps downstream / 1.244 Gbps upstream
PON WavelengthTx 1490 nm / Rx 1310 nm
Split RatioUp to 1:128
Transmission Distance20 km (9/125 μm single-mode fiber)
Uplink
Uplink Interfaces2 × GE RJ45 + 1 × GE SFP / 10GE SFP+
Management1 × 10/100/1000 Mbps out-of-band RJ45; CLI, Telnet, Web
Console1 × console port, 1 × USB-COM, 1 × USB 2.0
Software & Management
Backplane Bandwidth208 Gbps (124.992 Mpps forwarding rate)
Layer 2/3 Features16K MAC, 4096 VLANs, QinQ, VLAN translation, LACP, 802.1D/802.1W, port isolation
MulticastIGMP snooping, MLD v1/v2 snooping; 1K L2 + 1K L3 multicast groups
DHCP / IPv6DHCP server, relay, snooping, option 82; IPv6 NDP, ping, Telnet, routing
Physical & Environmental
Power Supply100–240 V AC or -36 to -75 V DC (rated 110/220 V AC, -48/-60 V DC)
Power Consumption40 W
Operating Temperature-20 to +60 °C
Downloads

OL3001 documents & firmware

Datasheet 1

FAQ

Frequently asked questions

Answers about deploying, configuring and integrating the OL3001.

What type of deployment is the OL3001 designed for?

The OL3001 is designed for compact GPON access scenarios where a full-size rack OLT is not required. Its small form factor makes it suitable for small businesses, stores, rental properties, multi-tenant buildings, localized FTTH networks and distributed access points.

How many ONTs can the OL3001 support?

The OL3001 provides one GPON interface and supports an optical split ratio of up to 1:128, allowing a single PON port to serve up to 128 subscriber ONTs when network design and optical budget requirements are met.

Is the OL3001 compatible with third-party ONU and ONT devices?

Yes. The OL3001 is designed for interoperability with third-party GPON ONU/ONT ecosystems through OMCI, including equipment from major vendors such as Huawei, ZTE, Nokia and FiberHome. Project-specific compatibility should be validated according to the required ONU model and configuration.

Project Support

Build Your Next PON Product with ORFA

Discuss product configuration, OLT compatibility, custom hardware, firmware functions, ID design or private-label requirements with our team.