GPON SFU ONU

OG-92SR 1GE GPON ONU

Single-port Gigabit ONU that auto-adapts to GPON or GEPON OLTs, with route/bridge dual mode, for single-family FTTH and FTTP connections.

PON Interface
1 × XPON (GPON/GEPON auto-adaptive), SC/APC or SC/UPC
PON Standard
ITU-T G.984.x
Line Rate
2.488 Gbps downstream / 1.244 Gbps upstream
PON Wavelength
Tx 1310 nm / Rx 1490 nm
Overview

1GE GPON ONU

OG-92SR is a single-family unit (SFU) ONT with one Gigabit Ethernet port and an ITU-T G.984 GPON interface (2.488 Gbps downstream, 1.244 Gbps upstream). It auto-adapts to GPON or GEPON OLTs, works in route or bridge mode and is remotely managed through standard OMCI and TR-069, with web, HTTP and Telnet access.

ORFA OG-92SR 1GE GPON ONU – Side angle
Key Features

What the OG-92SR brings to your network

01

GPON/GEPON auto-adaptive

Can be deployed flexibly with either GPON or GEPON OLT platforms.

02

Route/bridge dual mode

Runs as a transparent bridge or as a router with PPPoE, IPoE, NAT and DHCP server, to suit different ISP service models.

03

Gigabit Ethernet port

One 10/100/1000 Base-T RJ45 port with real throughput of up to 900 Mbps.

04

Third-party OLT compatibility

Designed to work with third-party OLT platforms, with activation by auto-discovered serial number and password per ITU-T G.984.3.

05

Remote management

Standard OMCI (ITU-T G.984.4 and G.988) and TR-069 support remote supervision, monitoring and maintenance.

06

Low power, flexible install

Draws less than 5 W from a 12 V adapter and can be placed on a desk or mounted on a wall.

Technical Data

Technical Specifications

ModelOG-92SR
PON
PON Interface1 × XPON (GPON/GEPON auto-adaptive), SC/APC or SC/UPC
PON StandardITU-T G.984.x
Line Rate2.488 Gbps downstream / 1.244 Gbps upstream
PON WavelengthTx 1310 nm / Rx 1490 nm
Receiver Sensitivity-27 dBm (-33 dBm optional); overload -8 dBm
Transmit Power+0.5 to +4 dBm
GPON Features8 T-CONTs, 32 GEM ports, AES-128 decryption, FEC
Interfaces
Ethernet1 × 10/100/1000 Mbps RJ45
LED IndicatorsPower, PON, LOS, LAN
Software & Management
ManagementOMCI (ITU-T G.984.4/G.988), TR-069, web GUI, HTTP/Telnet remote access
WAN ModesBridge, IPoE, PPPoE; IPv4/IPv6 dual stack
Layer 2/3 Features802.1D bridging, VLAN tagging, NAT/NAPT, ACL, firewall, ALG, DMZ, DDNS, UPnP
MulticastIGMP v2/v3 snooping, IGMP snooping with proxy report
Physical & Environmental
Power Supply12 V / 0.5 A external AC/DC adapter
Power Consumption< 5 W
Operating Temperature-10 to 40 °C
Humidity10% to 95% RH
InstallationDesktop or wall-mounted
Downloads

OG-92SR documents & firmware

Datasheet 1

FAQ

Frequently asked questions

Answers about deploying, configuring and integrating the OG-92SR.

Are ORFA ONUs compatible with major OLT brands?

Yes. Compliant with ITU-T G.984 and G.9807.1 standards, our ONUs use an optimized OMCI stack designed for plug-and-play interoperability with major OLT brands such as Huawei, ZTE, Nokia and FiberHome. Compatibility is confirmed for each OLT model and software version before deployment.

Can ORFA ONTs be managed remotely?

Yes. ORFA terminal devices support standard TR-069 / TR-369 (USP), OMCI and Web GUI management, enabling Zero-Touch Provisioning and remote management from the operator’s ACS or USP controller. Available features can vary by model, so please confirm the requirements for your project with our team.

Project Support

Build Your Next PON Product with ORFA

Discuss product configuration, OLT compatibility, custom hardware, firmware functions, ID design or private-label requirements with our team.