GPON SFU ONU

OG-93P 2.5GE XPON ONU

XPON ONU with one 2.5 Gigabit Ethernet port and route/bridge dual mode, for single-family FTTH and FTTP subscriber connections.

PON Interface
1 × GPON, SC/APC or SC/UPC
PON Standard
ITU-T G.984.x
Line Rate
2.488 Gbps downstream / 1.244 Gbps upstream
PON Wavelength
Tx 1310 nm / Rx 1490 nm
Overview

2.5GE XPON ONU

OG-93P is a single-family unit (SFU) ONT for FTTH and FTTP access, combining an ITU-T G.984 GPON interface (2.488 Gbps downstream, 1.244 Gbps upstream) with one 10/100/1000/2500 Base-T Ethernet port. Built on Realtek chips, it works in route or bridge mode, interoperates with third-party OLTs and is remotely managed through standard OMCI and TR-069.

ORFA OG-93P 2.5GE XPON ONU – Front view
Key Features

What the OG-93P brings to your network

01

2.5 Gigabit Ethernet port

One 10/100/1000/2500 Base-T RJ45 port with auto-negotiation and non-blocking wire-speed forwarding.

02

Route/bridge dual mode

Runs as a transparent bridge or as a router with PPPoE, IPoE, NAT and DHCP server, to suit different ISP service models.

03

Third-party OLT compatibility

Works with third-party OLTs, with activation by auto-discovered serial number and password per ITU-T G.984.3.

04

Remote management

Standard OMCI (ITU-T G.984.4 and G.988) and TR-069 support remote supervision, monitoring and maintenance.

05

Safe firmware upgrades

Two firmware images with integrity checking and automatic rollback.

06

Low power, flexible install

Draws less than 5 W from a 12 V adapter and can be placed on a desk or mounted on a wall.

Technical Data

Technical Specifications

ModelOG-93P
PON
PON Interface1 × GPON, SC/APC or SC/UPC
PON StandardITU-T G.984.x
Line Rate2.488 Gbps downstream / 1.244 Gbps upstream
PON WavelengthTx 1310 nm / Rx 1490 nm
Receiver Sensitivity-27 dBm (-33 dBm optional); overload -8 dBm
Transmit Power+0.5 to +4 dBm
GPON Features8 T-CONTs, 32 GEM ports, AES-128 decryption, FEC
Interfaces
Ethernet1 × 10/100/1000/2500 Mbps RJ45
LED IndicatorsPower, PON, LOS, 2.5G
Software & Management
ManagementOMCI (ITU-T G.984.4/G.988), TR-069, web GUI, HTTP/Telnet remote access
WAN ModesBridge, IPoE, PPPoE; IPv4/IPv6 dual stack
Layer 2/3 Features802.1D bridging, VLAN tagging, Q-in-Q, VLAN translation, NAT/NAPT, ACL, firewall, DMZ
MulticastIGMP v2/v3 snooping, IGMP snooping with proxy report
Physical & Environmental
Power Supply12 V / 0.5 A external AC/DC adapter
Power Consumption< 5 W
Operating Temperature-10 to 40 °C
Humidity10% to 95% RH
InstallationDesktop or wall-mounted
Downloads

OG-93P documents & firmware

Datasheet 1

FAQ

Frequently asked questions

Answers about deploying, configuring and integrating the OG-93P.

Are ORFA ONUs compatible with major OLT brands?

Yes. Compliant with ITU-T G.984 and G.9807.1 standards, our ONUs use an optimized OMCI stack designed for plug-and-play interoperability with major OLT brands such as Huawei, ZTE, Nokia and FiberHome. Compatibility is confirmed for each OLT model and software version before deployment.

Can ORFA ONTs be managed remotely?

Yes. ORFA terminal devices support standard TR-069 / TR-369 (USP), OMCI and Web GUI management, enabling Zero-Touch Provisioning and remote management from the operator’s ACS or USP controller. Available features can vary by model, so please confirm the requirements for your project with our team.

Project Support

Build Your Next PON Product with ORFA

Discuss product configuration, OLT compatibility, custom hardware, firmware functions, ID design or private-label requirements with our team.