Two GPON ports
Two GPON ports with up to 1:128 split ratio each and a 20 km transmission distance.





A compact 1U GPON OLT with two PON ports, four Gigabit uplinks and a 10GE uplink, for small businesses, shops and rental properties.
OL3002 is a 1U box GPON OLT with two GPON ports, four Gigabit RJ45 uplinks and one SFP/SFP+ uplink for up to 10GE. Each PON port supports split ratios up to 1:128 over 20 km. Designed for small businesses, stores and property leasing, it works with existing GPON ODN networks and is managed via CLI, Telnet or web.

Two GPON ports with up to 1:128 split ratio each and a 20 km transmission distance.
Four Gigabit RJ45 uplinks plus one SFP/SFP+ port that accepts GE or 10GE modules.
Online ONT configuration, auto-discovery, link detection and remote software upgrade simplify rollout.
16K MAC addresses, 4096 VLANs, QinQ, VLAN translation, static and dynamic LACP, and 802.1D/802.1W.
IGMP snooping and MLD v1/v2 snooping with up to 1K L2 and 1K L3 multicast groups, plus IPv6 routing.
| Model | OL3002 |
|---|---|
| PON | |
| PON Interface | 2 × GPON, SFP+ slots, SC/APC |
| PON Standard | ITU-T G.984 |
| Line Rate | 2.488 Gbps downstream / 1.244 Gbps upstream |
| PON Wavelength | Tx 1490 nm / Rx 1310 nm |
| Split Ratio | Up to 1:128 |
| Transmission Distance | 20 km (9/125 μm single-mode fiber) |
| Uplink | |
| Uplink Interfaces | 4 × GE RJ45 + 1 × GE SFP / 10GE SFP+ |
| Management | 1 × 10/100/1000 Mbps out-of-band RJ45; CLI, Telnet, Web |
| Console | 1 × console port, 1 × USB-COM, 1 × USB 2.0 |
| Software & Management | |
| Backplane Bandwidth | 208 Gbps (124.992 Mpps forwarding rate) |
| Layer 2/3 Features | 16K MAC, 4096 VLANs, QinQ, VLAN translation, LACP, 802.1D/802.1W, port isolation |
| Multicast | IGMP snooping, MLD v1/v2 snooping; 1K L2 + 1K L3 multicast groups |
| DHCP / IPv6 | DHCP server, relay, snooping, option 82; IPv6 NDP, ping, Telnet, routing |
| Physical & Environmental | |
| Power Supply | 100–240 V AC or -36 to -75 V DC (rated 110/220 V AC, -48/-60 V DC) |
| Power Consumption | 40 W |
| Operating Temperature | -20 to +60 °C |
Answers about deploying, configuring and integrating the OL3002.
ORFA designs its access products around standard PON technologies and interoperability requirements. Final compatibility should be verified according to the ONU/ONT model, OMCI implementation, firmware version, and target network environment.
Yes. ORFA can support product configuration, firmware-related requirements, interoperability testing, and project-specific technical discussions depending on the deployment scenario.
GPON is suitable for many standard broadband access applications, while XGS-PON is intended for higher-capacity 10G access networks. The choice depends on bandwidth requirements, subscriber density, existing infrastructure, and future network expansion plans.
Discuss product configuration, OLT compatibility, custom hardware, firmware functions, ID design or private-label requirements with our team.