10GE uplink
One SFP/SFP+ uplink port accepts GE or 10GE modules, alongside two Gigabit RJ45 uplinks.





A compact 1U GPON OLT with one PON port and a 10GE uplink, built for small businesses, shops and rental properties adding fiber access.
OL3001 is a 1U box GPON OLT with one GPON port, two Gigabit RJ45 uplinks and one SFP/SFP+ uplink for up to 10GE. It supports split ratios up to 1:128 over 20 km and is designed for small businesses, stores and property leasing. It works with existing GPON ODN networks and is managed via CLI, Telnet or web.

One SFP/SFP+ uplink port accepts GE or 10GE modules, alongside two Gigabit RJ45 uplinks.
The GPON port supports an optical split ratio of up to 1:128 and a 20 km transmission distance.
Online ONT configuration, auto-discovery, link detection and remote software upgrade simplify rollout.
16K MAC addresses, 4096 VLANs, QinQ, VLAN translation, static and dynamic LACP, and 802.1D/802.1W.
IGMP snooping and MLD v1/v2 snooping with up to 1K L2 and 1K L3 multicast groups, plus IPv6 routing.
| Model | OL3001 |
|---|---|
| PON | |
| PON Interface | 1 × GPON, SFP+ slot, SC/APC |
| PON Standard | ITU-T G.984 |
| Line Rate | 2.488 Gbps downstream / 1.244 Gbps upstream |
| PON Wavelength | Tx 1490 nm / Rx 1310 nm |
| Split Ratio | Up to 1:128 |
| Transmission Distance | 20 km (9/125 μm single-mode fiber) |
| Uplink | |
| Uplink Interfaces | 2 × GE RJ45 + 1 × GE SFP / 10GE SFP+ |
| Management | 1 × 10/100/1000 Mbps out-of-band RJ45; CLI, Telnet, Web |
| Console | 1 × console port, 1 × USB-COM, 1 × USB 2.0 |
| Software & Management | |
| Backplane Bandwidth | 208 Gbps (124.992 Mpps forwarding rate) |
| Layer 2/3 Features | 16K MAC, 4096 VLANs, QinQ, VLAN translation, LACP, 802.1D/802.1W, port isolation |
| Multicast | IGMP snooping, MLD v1/v2 snooping; 1K L2 + 1K L3 multicast groups |
| DHCP / IPv6 | DHCP server, relay, snooping, option 82; IPv6 NDP, ping, Telnet, routing |
| Physical & Environmental | |
| Power Supply | 100–240 V AC or -36 to -75 V DC (rated 110/220 V AC, -48/-60 V DC) |
| Power Consumption | 40 W |
| Operating Temperature | -20 to +60 °C |
Answers about deploying, configuring and integrating the OL3001.
The OL3001 is designed for compact GPON access scenarios where a full-size rack OLT is not required. Its small form factor makes it suitable for small businesses, stores, rental properties, multi-tenant buildings, localized FTTH networks and distributed access points.
The OL3001 provides one GPON interface and supports an optical split ratio of up to 1:128, allowing a single PON port to serve up to 128 subscriber ONTs when network design and optical budget requirements are met.
Yes. The OL3001 is designed for interoperability with third-party GPON ONU/ONT ecosystems through OMCI, including equipment from major vendors such as Huawei, ZTE, Nokia and FiberHome. Project-specific compatibility should be validated according to the required ONU model and configuration.
Discuss product configuration, OLT compatibility, custom hardware, firmware functions, ID design or private-label requirements with our team.