Drop-in SFP+ form factor
Hot-pluggable SFP+ module that replaces the Ethernet SFP+ in gateways, switches, routers, VDSL MDUs, G.fast DPUs or backhaul equipment.
Representative imageHot-pluggable XGS-PON ONU in a standard SFP+ module with SC/APC receptacle, for adding 10G symmetric PON access to existing gateways, switches, routers and backhaul equipment.
OXG-10GS is an XGS-PON ONU in a standard SFP+ form factor that can replace the Ethernet SFP+ module in an existing gateway, switch, router or backhaul unit. It integrates the XGS-PON MAC and an OMCI stack, runs 9.953 Gb/s symmetric over a single fiber with an SC/APC receptacle, reaches 20 km on single-mode fiber and draws less than 3 W.
Hot-pluggable SFP+ module that replaces the Ethernet SFP+ in gateways, switches, routers, VDSL MDUs, G.fast DPUs or backhaul equipment.
Single-fiber bidirectional link at 9.953 Gb/s upstream and downstream, compliant with ITU-T G.9807.1 and G.9807.2.
1270 nm DFB laser transmitter and high-sensitivity 1577 nm APD receiver support 20 km over single-mode fiber.
Integrated XGS-PON MAC and ITU-T G.988 OMCI stack (L2 MAC bridge, up to 64 bridges) for remote supervision, monitoring and maintenance.
Under 3 W from a single 3.3 V supply, in commercial (0 to 70 °C) or industrial (-40 to 85 °C) case-temperature versions.
Synchronous Ethernet, IEEE 1588v2 (ITU-T G.8275) and IEEE 802.1ag / ITU-T Y.1731 OAM with hardware delay and loss measurement.
| Model | OXG-10GS |
|---|---|
| PON | |
| PON Interface | 1 × XGS-PON, SC/APC receptacle |
| PON Standard | ITU-T G.9807.1, G.9807.2, G.987.2 |
| Line Rate | 9.953 Gb/s upstream / 9.953 Gb/s downstream |
| PON Wavelength | TX 1270 nm (1260–1280 nm), RX 1577 nm (1575–1580 nm) |
| Transmit Power | +4 to +9 dBm (1270 nm DML DFB laser) |
| Receiver Sensitivity | -29 dBm (APD); overload -9 dBm |
| Transmission Distance | 20 km over single-mode fiber |
| Interfaces | |
| Form Factor | SFP+, hot-pluggable |
| Host Interface | CML data I/O; I²C serial ID and digital diagnostic monitoring |
| Software & Management | |
| Management | OMCI (ITU-T G.988), L2 MAC bridge, up to 64 bridges |
| PON Resources | 256 GEM/XGEM ports, 64 T-CONTs |
| Synchronization | SyncE, IEEE 1588v2 / ITU-T G.8275 |
| Ethernet OAM | IEEE 802.1ag, ITU-T Y.1731 (hardware delay/loss measurement) |
| Physical & Environmental | |
| Power Supply | 3.3 V DC from host (3.13–3.47 V) |
| Power Consumption | < 3 W |
| Operating Temperature | Case 0 to 70 °C (commercial) / -40 to 85 °C (industrial) |
| Humidity | 5% to 95% (operating) |
| Compliance | RoHS-6 |
Answers about deploying, configuring and integrating the OXG-10GS.
Yes. Compliant with ITU-T G.984 and G.9807.1 standards, our ONUs use an optimized OMCI stack designed for plug-and-play interoperability with major OLT brands such as Huawei, ZTE, Nokia and FiberHome. Compatibility is confirmed for each OLT model and software version before deployment.
Yes. ORFA terminal devices support standard TR-069 / TR-369 (USP), OMCI and Web GUI management, enabling Zero-Touch Provisioning and remote management from the operator’s ACS or USP controller. Available features can vary by model, so please confirm the requirements for your project with our team.
Discuss product configuration, OLT compatibility, custom hardware, firmware functions, ID design or private-label requirements with our team.