Drop-in GPON for SFP hosts
Standard SFP package with SGMII interface replaces the Ethernet SFP module in gateways, switches, routers or backhaul equipment.
Representative imageHot-pluggable SFP ONU stick that adds a GPON uplink to Ethernet switches, routers, gateways and backhaul equipment with an SFP slot.
OG-GS packs a complete GPON ONU into a standard SFP module with an SGMII interface, so it can replace the Ethernet SFP in an existing gateway, switch, router or backhaul device. With an integrated GPON MAC and ITU-T G.988 OMCI stack, it provides full FCAPS management and supports 20 km reach over single-mode fiber.
Standard SFP package with SGMII interface replaces the Ethernet SFP module in gateways, switches, routers or backhaul equipment.
Integrated GPON MAC and ITU-T G.988 OMCI provide full FCAPS management, including supervision, monitoring and maintenance.
1310 nm DFB laser transmitter and high-sensitivity 1490 nm receiver support 20 km over single-mode fiber.
SFF-8472 digital diagnostic monitoring reports temperature, supply voltage, bias current and Tx/Rx optical power.
Hot-pluggable module with Dying Gasp support, running from a single 3.3 V supply at under 2.5 W.
Specified for 0 to 70 °C (commercial) or -40 to 85 °C (industrial) case temperature.
| Model | OG-GS |
|---|---|
| PON | |
| PON Interface | 1 × GPON, SC/APC receptacle |
| PON Standard | ITU-T G.984.2 (incl. Amendment 1) |
| Line Rate | 2.488 Gbps downstream / 1.244 Gbps upstream |
| PON Wavelength | Tx 1310 nm / Rx 1490 nm |
| Transmission Distance | Up to 20 km over single-mode fiber |
| Receiver Sensitivity | -28 dBm; overload -8 dBm |
| Transmit Power | 0 to +5 dBm (1310 nm DFB laser) |
| Interfaces | |
| Host Interface | SFP edge connector (MSA SFF-8074i), SGMII |
| Form Factor | Hot-pluggable SFP |
| Software & Management | |
| Management | OMCI (ITU-T G.988); digital diagnostic monitoring (SFF-8472 V9.5) |
| Physical & Environmental | |
| Power Supply | Single 3.3 V (3.13–3.47 V), typ. 530 mA |
| Power Consumption | < 2.5 W |
| Operating Temperature | Case 0 to 70 °C (commercial) / -40 to 85 °C (industrial) |
| Humidity | 5% to 95% |
| Dimensions | 79 × 13.7 mm (L × W); height 8.55 mm body, 14.35 mm at SC end |
| Compliance | SFF-8074i, SFF-8472, FCC Part 15 Class B, FDA 21 CFR 1040.10/1040.11, RoHS |
Answers about deploying, configuring and integrating the OG-GS.
Yes. Compliant with ITU-T G.984 and G.9807.1 standards, our ONUs use an optimized OMCI stack designed for plug-and-play interoperability with major OLT brands such as Huawei, ZTE, Nokia and FiberHome. Compatibility is confirmed for each OLT model and software version before deployment.
Yes. ORFA terminal devices support standard TR-069 / TR-369 (USP), OMCI and Web GUI management, enabling Zero-Touch Provisioning and remote management from the operator’s ACS or USP controller. Available features can vary by model, so please confirm the requirements for your project with our team.
Discuss product configuration, OLT compatibility, custom hardware, firmware functions, ID design or private-label requirements with our team.