What is 5G CPE
5G is the fifth generation mobile network, the latest cellular standard after 4G. Compared with the 4G, 5G has higher peak data speeds, lower latency, more reliability, and better spectrum efficiency. The 5G CPE is a Customer premises equipment with 5G RF module, which can convert the 5G/4G signal to Ethernet or WIFI connectivity, providing the internet connection to subscribers without cable.
5G VS 4G
Peak data speed
The 5G peak data speed can reach 10-20Gbps, and The 4G maximum can reach 1Gbps
Network Energy efficiency
Compared with 4G, 5G has a 100 times improvement in energy efficiency
The 5G network latency is around 1ms, but 4G should be 10ms
5G has a 3-5 times improvement in spectrum efficiency
Enhanced Mobile Broadband (eMBB)
The eMBB scenario is an upgraded version of the mobile broadband that people use today, mainly to serve the needs of the consumer Internet. In this scenario, the emphasis is on the bandwidth of the network. Among the 5G indicators mentioned above, the rate above 10 Gbps serves the eMBB scenario.
Low latency and high-reliability communication (uRLLC, Ultra-Reliable & Low Latency Communication)
It is mainly used for IoT scenarios. For example, the Internet of vehicles, drones, industrial interconnection, etc. Such scenarios have one thing in common: they have high requirements on network latency and reliability. For example, on the Internet of Vehicles, if the delay is long and the network cannot respond to the data in a very short time, serious traffic accidents may occur, and even personal safety may be endangered.
Massive Machine Type Communication (mMTC, Massive Machine Type Communication)
This is a typical IoT scenario, such as smart furniture, smart meters, smart wearable devices, etc. There are many terminals in a unit area, and the network is required to support the simultaneous access of these terminals, and at the same time, smart devices are required to reduce the network standby time greatly. power consumption.
ORFA TECH 5G CPE Porduct Portfolio
ORFA TECH 5G Indoor Router
The G565V is a 5G indoor router powered by Qualcomm SDX62, unleashing the full speed of 5G, it provides the 3.2Gbps peak data rate on 5G and wifi 6 connection for home use.
- Wi-Fi 6 AX3000 dual-band 5G mobile CPE.
- 1*2.5GE WAN, 4*GE LAN, 1*RJ11 Voice Port, 1*USB 3.0
- Micro-SIM card slot.
- Dual-band WIFI With IEEE 802.11ax Compliant
- NSA/SA dual-mode network, compatible with 4G network and peak download rate of 3.2Gbps
- Qualcomm SDX62 Chipset
ORFA TECH 5G Outdoor Router
The 5G ODU Outdoor CPE G500ODU is an easy-to-deploy, high-performance 5G/LTE CPE that features a dedicated
2.5Gigabit Ethernet port and 5G/LTE mobile broadband for maximum redundancy and flexibility for
intense Internet applications in remote areas. Rugged design, flexible deployment options, and ease of use make the 5G ODU ideal for large-scale and individual deployments.
- G500ODU 5G outdoor LTE Router
- Qualcomm X55 Solution
- Support 5G NRN SA,5G-NR SA.
- 1*1GE LAN Port;
- TXRX: 4*4 MIMO, 1T4R ;
- NSA UL 650Mbps, DL 5Gbps
- SA UL 900Mbps, DL 4.2Gbps
- 48V standard POE supply